Changzhou Su Li drying equipment Co., Ltd.
Changzhou Su Li drying equipment Co., Ltd.
Add to Cart
Spray dryer professional processing:
Spray dryer is a device that can complete drying and granulation at the same time. It is widely used in drying heat-sensitive liquids, suspensions and viscous liquids, such as milk, egg liquid, medicinal materials, extracts, inorganic salts, etc. Its working principle is to spray the liquid material into mist through a high-pressure nozzle, contact with hot air, and evaporate the water quickly to obtain dry powder or particles.
Spray dryers are suitable for a variety of fields, including but not limited to:
Food industry: used for drying heat-sensitive liquids such as milk and egg liquid.
Pharmaceutical industry: used for drying materials such as medicinal materials and extracts.
Chemical industry: used for drying fuels, intermediates, soap powder and inorganic salts.
Spray dryers are mainly of the following types:
Centrifugal spray dryer: The liquid is thrown into mist through a high-speed rotating centrifugal disk and dried in contact with hot air.
Pressure spray dryer: The liquid is sprayed into mist through a high-pressure nozzle for drying.
Chinese medicine extract spray dryer: specially used for drying Chinese medicine extract.
Technical parameters and performance characteristics of spray dryer:
The technical parameters of spray dryer include processing capacity, hot air temperature, feed speed, etc.
Its performance characteristics include:
High efficiency and fast speed: It can complete the drying process in a short time.
Easy to operate: By adjusting the pressure, flow rate and size of the spray hole of the liquid pump, particles of the required size can be obtained.
Wide range of application: It is suitable for drying and granulating a variety of liquid materials.
Technical specification:
| Model/Item/Parameter | 5 | 25 | 50 | 150 | 200-2000 |
| inlet temperature | 140-350 self-control | ||||
| output temperature | 80-90 | ||||
| water evaporation(kg/h) | 5 | 25 | 50 | 150 | 200-2000 |
| Centrifugal spray head transmission form | Compressed air transmission | Mechanical transmission | |||
| Rotating speed(r.p.m) | 25000 | 18000 | 18000 | 15000 | 8000-15000 |
| Spray disc diameter(mm) | 50 | 120 | 120 | 150 | 180-240 |
| heat source | electricity | Steam + electricity | Steam + electricity, oil, gas, hot air stove | ||
| Electric heating power(kw) | 9 | 36 | 72 | 99 | |
| Overall dimensions (Length×width×height)(m) | 1.8×0.93×2.2 | 3×2.7×4.26 | 3.5×3.5×4.8 | 5.5×4×7 | Determine according to actual situation |
| Dry powder recycling(%) | ≥95 | ||||
Note: The amount of water evaporation is related to the characteristics of the material and the hot air inlet and outlet temperatures. When the outlet temperature is 90℃, the water evaporation curve is shown in the figure above (for model selection reference). As the product is constantly updated, the relevant parameters will change without prior notice.
Ordering instructions:
◎Name and physical properties of the material liquid: solid content (or water content), viscosity, surface tension, and PH value.
◎Powder capacity after drying, allowable residual moisture content, particle size, and allowable maximum temperature.
◎Output and daily opening hours.
◎Available energy: available steam pressure, electrical capacity, available coal, oil, and gas.
◎Control requirements: Whether the inlet and outlet temperatures need to be controlled automatically.
◎Powder collection requirements: Whether to install a bag trap and environmental requirements for exhaust gas emissions.
◎Other special requirements.
Equipment pictures:
